How to Build Glass Stairs

Published: 21st June 2010
Views: N/A

Glass staircase is one of the most prominent architectural features and modern that you can install in your home or office. The only thing that should be noted that if you even think about a project like this is that this is much more time-consuming and technical, expensive and dangerous than the vast majority of projects do it yourself. There are many considerations that must be taken into account to make sure that your glass stairs safe and practical for a person to walk on. In addition, there are quite a number of specialized tools and links that should be used to complete this project. If this does not deter you, but, Is there a possibility to create a modern and impressive staircase in your home or offices.

Tools and materials required:

* Measuring tape

* Specialized glass connectors

* Glass plates of high tension

* Screwdriver

* Drill

* Glass pieces Drill

Step 1: Measure

Measure the area that you want your stairs to go. From one floor to another, and this measurement is known with a high level of "total". After you have this number, in inches, and divide by 7.5 inches in order to determine the number of steps to be taken to cover the vertical distance. Once you take these measurements, you will need to purchase the items you will need for the stairs.

Buy Step 2:

When you purchase the necessary materials for this project, be aware that you are likely to be buying some kind of glass with stairs several directions you will want to follow closely. In general, will be looking for high tension, and thick glass which will be able to hold a lot of weight in order to provide adequate safety. Because you simply can not hammer nails or screw in the glass, will be dealing with specialized links that allow you to connect two pieces of glass together, or a piece of glass on a piece of metal. The main things that you'll have to worry about when purchasing materials that you took accurate measurements and your budget.

Step 3: Create the staircase

Individual instructions for installing drawer will vary greatly depending on the number of installed glass stairs you can buy. In general, you will be building the first frame - most likely from the metal - which will eventually be attached to individual glass panels that I bought along with several stairs. Take your time and build this framework very carefully, as this will provide the structural integrity of the main underlying all of the stairs stop. Use quality tools and materials needed to accomplish this task, where the tray can be very dangerous if not built correctly.

Once the frame carefully, you will be ready to begin to attach glass panels. Use links are included in the staircase and follow the directions to attach each panel of glass in a metal frame. When using the glass connectors, always remember that there is a fine line between over-and under tightening that must be taken into account. If overtightened ties glass cracking may occur. If they are under strict, you may be too broad stairs. Follow the directions closely, and there must be a problem with the construction sector. carries free home improvement advice, home repair, extreme home makeover, home improvement site, DIY, do-it-yourself, buying guides, consumer reports ,Free home improvement advice, great remodeling tips, and appliance buying guides by leading home improvement authority and DIY expert.

For further detail about visit our website:

Report this article Ask About This Article

More to Explore